Recent Mold Remediation Posts

Three Places to Check for Mold

8/9/2018 (Permalink)

Mold Remediation Three Places to Check for Mold A mold colony grew and spread quickly in this laundry room, hidden by the washing machine.

Just hearing the word “mold” can cause us all to cringe. It’s odorous, unsightly, and even dangerous to our health. Mold growth can appear quickly, so knowing where to look and what areas are best to practice preventive measures in can help give you peace of mind.

Here are the top three areas to check regularly for mold growth:

The Bathroom

Everyone knows that mold likes water and wet areas, making your bathrooms a hotbed for mold growth. Most bathrooms are cleaned thoroughly at least once a week, this is a great time to check for mold. Look in the least traveled areas, such as corners of the linen closet, behind the toilet, under the sink. If there are, or have been, any leaks in these places in the past, these areas are in danger until they are fully dry. Investing in a dehumidifier for your bathroom can assist in the prevention of mold growth.

The Kitchen

This area of your home is also a watery place, it is used more than any other area in the house besides the bath. Watch out for spills and leaks and clean them up immediately to ensure that they are not attracting mold spores. Spores are always in our air and cannot be removed, the trick to preventing mold growth is not giving them a place to land and settle.

The laundry room

Because the laundry room houses large appliances, it also has nooks and crannies that are not cleaned often. Add to that the humidity in the air and possible unseen leaks or drips, and you have a recipe for the establishment of a mold colony. Pull the washer and dryer out from the wall regularly, and make sure the areas behind them are clean, dry, and disinfected in order to prevent mold growth.

Other areas to check frequently for mold include hall closets, garages, and basements.

Our team at SERVPRO of South Richland County is always here to help you with any issues related to mold remediation in your home or business. Large-scale cleanups after flooding and fire are our specialties. Call us at (419) 526-2701.

Preventing Mold in Your Home

6/12/2018 (Permalink)

Mold Remediation Preventing Mold in Your Home This dining room was completely taken over by mold that was allowed to grow without professional intervention.

Residential and commercial buildings alike can be difficult to prevent mold growth in because of the summer humidity levels that come with Ohio’s climate. Mold loves humidity and can easily survive and flourish on even the smallest amount of moisture within the walls or floors during a humid summer day. Because of this, indoor mold is most commonly found in the most damp, humid areas of the house, especially bathrooms, kitchens, and basements. Mold can grow uncontrolled as well on ceilings and inside of walls if the building has been recently water damaged.

Preventative Measures

Mold is a common fungus, of which there are thousands of different species spread throughout the world. The only way to prevent mold growth is to make the building uninhabitable to the fungi life cycle. Here are a few ways to deter mold growth:

  • Use mold inhibitors on walls before painting any area, especially potentially damp areas like bathrooms and basements.
  • Use dehumidifiers, air conditioners, and fans to keep humidity levels steady and low enough that mold cannot grow, the ideal being between 30 and 65 percent.
  • Make sure that the areas under and around houseplants are free from excess water
  • Keep rugs from damp rooms such as bathrooms or basements dry and frequently cleaned. Spores can thrive in a damp carpet and cause a severe mold issue.
  • Use sanitizing mold prevention products to clean areas after water damage or mildew growth to reduce the risk of future mold issues in your home..
  • Contact a mold remediation professional at the first sign of water leakage under appliances or in bathrooms.

Sometimes mold attacks in unseen places after a flood or pipe leak. Once this occurs, removing the water is not enough to eliminate the fungi entirely. Mold can survive for years without water, only to reemerge when exposed to liquid. Seeking the assistance of a remediation expert may help prevent future contamination and water damage. Our experts at SERVPRO of South Richland County know how to disinfect infected areas and completely kill mold colonies in your residence.

Mold Damage Mansfield -Homeowners Hate It

4/27/2018 (Permalink)

Mold Remediation Mold Damage Mansfield -Homeowners Hate It Mold Damage Around the Door Can Indicate Larger Problems within Your Mansfield home.

SERVPRO Can Restore Your Mold Damaged Mansfield  Home to a Safe and Healthy Place

Mold damage in your Mansfield  home can cause adverse health effects to you and your family. Mold growth also indicates something else may be wrong with your house--too high humidity , moisture resulting from leaks or cracks in the foundation, or the aftermath of a flood. Molds are fungi that impact most people in one way or another. In many, it merely makes them feel uncomfortable. The reaction to allergens, mycotoxins, and even pollen vary among individuals.

Mold spores that are common all around your home need moisture to grow. It also requires an organic substance for nutrients. The reason it might be in your house could be because you have a water leak somewhere. This supplies the moisture that the mold requires for colonizing into large patches, visible or not.

When you call upon a professional mold remediation company like SERVPRO, expect quick service. They come and begin the inspection that is necessary to locate all of the areas in which mold is growing. Since the fungi can start to grow in as little as 48-72 hours, they know they have to work fast. They have the tools and devices to find the mold growths. It can be inside of the walls, below the flooring and above the ceilings. No carpet is left unturned if there is a hint of moisture buildup. After the inspection, the work begins.

This process starts with containment if more than an isolated mold patch is discovered. Air circulation by the HVAC system or fans must be stopped to prevent the movement of mold spores to unaffected areas of the property.  All non-porous surfaces such as tile, metal and plastic can be cleaned and sanitized with green technology cleansers and disinfectant agents. Materials that cannot be cleaned, such as portions of drywall, ceiling tiles, carpets and padding, and some furniture, are wrapped, removed and discarded in an authorized location. This is always the last resort. SERVPRO's aim is to remediate your home in the most practical and least expensive manner.

Unfortunately, replacement of building materials that have to be torn out can occur. This means the sheet rock, whether replacing entire sheets or just a few patches to clean up the walls. It also means the cleaning and rehanging of the draperies and placing fabric cushions that have been cleaned and re-stuffed, if appropriate. As examples.

Commercial air purifiers and foggers are employed to sanitize and deodorize the affected areas of the home. Air scrubbers will suck in the ambient air and remove a large portion of the mold spores. SERVPRO will conduct a final walk-through to make sure that the known areas of mold infestation have been destroyed, and there are not moisture problems remaining. We will restore your home to its pre-mold damage condition "Like it never even happened."

When you detect a problem with mold damage, give SERVPRO of South Richland County a call.

(419)526-2701

Prevention Is the Best Mold Cleanup Technique

4/25/2018 (Permalink)

What's the best way to get mold out of your home in Mansfield, Ohio? Don't give it a chance to start growing. Sometimes you don't realize the need for mold prevention until you have to deal with a major remediation. After a cleanup, our residential mold remediation team may be able to give you tips you can use to prevent mold from returning to your home.

Avoid Water Damage

Excess water creates a great place for mold to start growing. In fact, spores need to land on a wet surface to start growing in a new place. If you can prevent water damage, you have taken away one of the necessities of this fungus. Of course, some water problems happen quickly and without warning, but you can keep these tips in mind as you try to prevent water issues:

• Clean out your gutters
• Avoid planting trees too close to the foundation
• Hire a plumber to address leaks as soon as possible
• Make fixes to your roof quickly
• Test your sump pump regularly
• Turn off the water supply before going out of town

Mold prevention requires you to think ahead and act without hesitation.

Control Humidity

Excess moisture can also come in the form of high humidity.  Mold growth can be kick-started by high levels of moisture in the air. You can prevent this type of water problem by running your HVAC system or using a dehumidifier in your home. The goal should be to keep your home's humidity level at or below 45 percent.

Reduce Clutter

It may sound silly, but cutting back on clutter can actually help stop mold growth. Too much stuff laying around your house can reduce circulation, which limits the effectiveness of your HVAC unit. Some clutter could even encourage condensation.

If you want to easily take care of a mold problem, you need to start practicing mold prevention. Stopping mold from growing is the best way to take care of the fungus.

What Is the 5-Step Mold Remediation Process?

4/25/2018 (Permalink)

What Is the 5-Step Mold Remediation Process?

If you're in Mansfield, Ohio dealing with black mold, then you might want to understand the mold remediation process. That's the industry name for an established set of mold cleanup procedures that have the best chance to:

Improve air quality
Restore like-new appearances
Remove the maximum amount of mold

1. Isolation

Quarantining affected areas begins with identifying them. This typically involves a black mold expert coming to your home to perform a thorough inspection. Containment is an important step towards tackling the problem.

2. Safety

Safety usually comes first. However, in the case of mold remediation, protection tends to be necessary at every step of the process. Protective measures depend on the extent and type of the infestation, but they often include:

Ventilation
Respiratory gear
Evacuation of the site
Protective clothing

3. Removal

Teardown procedures for your home might be as simple as removing some drywall. However, more involved measures might be necessary, such as structural replacement or interior refinishing. Mold is rarely a superficial problem, especially when it gets to the point where you might consider calling a professional.

4. Cleanup

You might think the term 'cleanup' is applicable to the entire job of mold removal, but this step is more precise. Black mold technicians select appropriate chemicals to clean each type of affected material and its surroundings before proceeding with any final steps. The reason: mold starts out in microscopic quantities; it's not enough to simply remove what you can see.

5. Drying

Mold loves moisture, so getting rid of its habitat is an important step. This is especially true if the area needs to be closed up, caulked over or painted. Professional driers and monitoring equipment are a big help at this stage.

Mold remediation might be a fancy term for mold cleanup, but there's nothing elegant about removing mold from a home. It's a practical process that often requires experience, equipment and know-how to pull off effectively .

Call SERVPRO of South Richland County for more information on mold.

(419)526-5701

Where’d This Mold Come From? 3 Reasons You’re Experiencing Mold Growth

4/25/2018 (Permalink)

Where’d This Mold Come From? 3 Reasons You’re Experiencing Mold Growth

No one wants to find mold growing in their home. However, it’s a common occurrence the average homeowner in Mansfield, Ohio can expect to face once or twice in a lifetime. Regardless of how commonplace the issue might be, when you locate a little patch of mold under the sink or elsewhere in your house, it’s probably your first instinct to ask yourself, “How did this get here?” The answer is typically easier than you might think. There are three main reasons why you might be experience black moldd in your home:

1. A Moisture Problem

An ongoing moisture problem is usually the chief cause of mold growth and spread. Some common household moisture issues that could lead to the presence of mold include:

Leaks in plumbing
Leaking roofs or siding
Improperly sealed walls and other surfaces
Broken water supply lines

These issues are simple enough to repair, but they can be difficult to identify at times. If left unchecked, mold is likely to form in areas that experience water-damage due to these problems.

2. Air Temperature and Humidity

Over time, keeping your home just a bit too warm can facilitate the growth of black mold, just like common moisture issues. Humid air traps water in an enclosed space, which then condenses on walls. Mold spores come into contact with this moisture and latch onto the source. Keeping the thermostat a bit lower when you expect to be out of the house can combat mold a bit.

3. Flooding

Flooding is perhaps the most obvious cause of mold growth. During flooding of any intensity, parts of your home are subjected to a huge amount of standing water. Even after a bit of professional mold cleanup, it’s likely some of this water has soaked into the walls of your home where it can provide moisture for mold growth.

Understanding the causes of black mold growth can help you prevent the necessary conditions for a thriving mold contamination in your home, allowing you and your family to live and breathe easily. Call SERVPRO of South Richland County for more information on mold.

419-526-2701

Most Popular FAQs About Mold

4/25/2018 (Permalink)

With black mold turning up in so many articles in recent years, it’s not surprising that people have so many questions about water damage, mold growth and mold remediation in Mansfield,Ohio. Read on to find out answers to some of the most popular questions about this common problem.

1. What Does Mold Need To Grow?

Like all living organisms, mold needs water and nutrients to grow. Mold spores are carried in the air and are found nearly everywhere. When a spore lands in a location with good conditions it will grow into a visible colony. Because the fungus can get nutrients from almost anything, including wood, paper and organic debris found in dust, moisture determines were mold grows on your property.

Flooding, burst pipes and leaks can all result in water damage that lingers for a long time after the event. When materials remain damp for more than 48 hours, mold can begin to grow.

2. At What Humidity Does Mold Thrive?

In climates with high humidity, atmospheric moisture can sometimes be sufficient to encourage mold growth. To keep mold under control, humidity should be kept below 60 percent, at least. Below 50 percent is ideal.

3. What Is the Process for Mold Remediation?

If you require professional mold remediation in Mansfield, Ohio , there are several steps. First, an expert will assess the situation in your building and create a plan. Next, the affected areas are contained. Moldy materials are either cleaned and disinfected or removed from the property and disposed of. Finally, the area is dried completely and then restored to its original condition.

4. Can You Stay Around During Mold Remediation?

It depends on the extent of the mold growth. If mold is confined to a smaller area, it will be contained and it is perfectly safe to be elsewhere in the building. If most of the property is affected, the whole structure may need to be contained and you may be required to relocate during the cleanup.
For more information about commercial mold remediation. Call SERVPRO of Richland County.

419-526-2701

Mold Remediation

3/14/2018 (Permalink)

SERVPRO of South Richland offers mold remediation and restoration; we have the training, equipment and expertise to better assist you. 

I spoke with our Mold and Biohazard Manager to ask him some questions about how this process works.

It is preferred that you have an Industrial Hygienist protocol done.

What is that?

This is a process where air sampling and affected areas are tested to provide a detailed remediation and restoration protocol for SERVPRO of South Richland County to follow. There is also a post-test that will take place once we are finished to confirm clearance. 

Every time our team handles a mold job, we are required to wear the appropriate PPE (Personal Protective Equipment) which includes items such as coveralls and respirators. 

SERVPRO of South Richland County will make sure to keep anything deemed salvageable; we go above and beyond to ensure restoration before removal.  Unfortunately, in most situations there is a some tear out involved to remove affected areas such as drywall, flooring, and/or furniture.

During the mold remediation process a HEPA vacuum is used, HEPA filters are designed to capture particles as small as mold spores and to insure that they do not get reintroduced. Our mold experts use “negative air” containment, which is created by positioning negative air machines to introduce clean air into the affected area and push contaminated air outside the home.

You want to consider getting your HVAC cleaned as well, the mold spores can collect there and be dispersed throughout the home.

Every mold infestation is different, from the amount of mold to the types of materials affected. Each scenario requires a unique solution, but the general process stays the same. If you have any questions, give us a call today; 419-526-2701.

Untreated sump pump failure leads to mold

1/26/2018 (Permalink)

Mold Remediation Untreated sump pump failure leads to mold Contents Pack out

One of the realities in the restoration industry is we come across cases of hoarding on a regular basis.  When hoarding is combined with water damage it creates a nasty mess.

In the case of this customer, she suffered a sump pump failure that caused her basement to partially flood with water.  When we arrived it was not even possible to get our technicians into the basement because of the high amount of contents.

The water had been allowed to dwell for a few days before she called us so the basement was already smelling of mold.  Mold can grow in as little time as 72 hours.

In this photo, you can see our technicians starting a contents pack-out before we can address the wet structure.

CDC Advises Against Home Mold Testing

1/3/2018 (Permalink)

Mold Remediation CDC Advises Against Home Mold Testing If you see it, call SERVPRO. We are always here to help.

The CDC states that  “generally, it is not necessary to identify the species of mold growing in a residence, and [the] CDC does not recommend routine sampling for molds.”

Testing, to be accurate, should be done by and Indoor Environmental Professional (IEP) or an Industrial Hygienist (IH).  These professionals have the ability to test in a manner that gives an accurate representation of the environment inside the structure. Clearance testing after mitigation should also be a part of the protocol to confirm the effectiveness of the mitigation.  

Testing not performed by the mitigation company handling the work adds a level of accountability to the project, avoids a conflict of interest, and insures the building owner of properly mitigated mold damage.

SERVPRO of South Richland County  is committed to properly remediating any mold damage in your home, making it, “Like it never even happened.”

For more information and to keep up with our tips, follow SERVPRO on Twitter: @SERVPROofRich

Mold Damage Mitigation And Remediation Services Available For Your South Richland County property

1/3/2018 (Permalink)

SERVPRO Provides Proper Protocols for Successful Mold Remediation


Looking at everywhere mold can choose to grow on your South Richland County property; it is no surprise that it often finds a comfortable spot in your basement. Basement mold is a common occurrence that many homeowners face, especially since mold only needs water, oxygen, and food to grow. Lack of sunlight is also a plus for these fungi to proliferate.

Gravity sends water to the lowest spot in your home. So, it makes sense that your basement or the crawlspace under your Mansfield area home has the highest chance of mold damage. If the problem is severe, you may want to consider locating a professional mold company to handle the situation.

Regardless of what some sources might say, the species or amount of mold growing in your home has zero impact on your mold remediation process, and any amount or species may cause health effects. SERVPRO technicians follow specific guidelines designed to focus on controlling mold growth found in your home. We use EPA-registered disinfectants, negative airflow machines, and plastic sheeting to help reduce the spread.

Your team of SERVPRO IICRC-industry certified professionals removes saturated materials and additional debris and pay close attention to detail, cleaning every surface. Each material requires a specific cleaning method or a combination of cleaning methods to achieve favorable results. However, our technicians have years of experience performing mold remediation services and work in a quick, efficient manner to save you time and money.

SERVPRO staff works with your insurance company and keeps you informed throughout the remediation process. We make sound recommendations to help reduce or prevent future growth and offer a variety of solutions that help you control your indoor living environment.

We can do everything from mold remediation services to the installation of a basement or crawlspace encapsulation system, install dehumidification equipment, and thoroughly inspect your ventilation system throughout your home. You have the power to take charge of the air quality in your home.

Contact SERVPRO of South Richland County today for detailed information about any of our services or to begin your home’s mold remediation service, today. (419) 526-2701

Inspect For Mold Damage in Richland County

11/30/2017 (Permalink)

Mold Remediation Inspect For Mold Damage in Richland County Mold can hide or exist in plain sight. Regardless of the mold type, contact SERVPRO to figure out the cause and remediate the damage

SERVPRO Technicians Find the Cause of the Mold Infestation Before Starting the Remediation Process

The hot summer months come to an end, and the leaves begin to fall. Moving into a new season is a perfect time to check for mold issues in areas of your home you may neglect. Our area can see some ice and snow during the winter, and if gutters, eaves, and shingles need maintenance, moisture pushes in and creates a perfect environment for mold damage.
 
Your home experiences all four seasons, exposing it to mold damage risk in Richland County.. Before we move into the colder months, evaluate the musty smell you notice when you open the door to your attic. Ice dams from winters and early springs past may have created a pathway for water to invade and saturate rafters and studs right under your roof. Severe cases allow that moisture to seep into your living areas. Do you see dark staining on ceilings or walls? A mold inspection is in order.
 
Often the only sign you notice when mold damages your home is an earthy, unpleasant smell. SERVPRO responds by sending an experienced mold remediation technician to check out concerns. If mold is detected, we work with you to discover where the moisture mold needs for growth is intruding. Our workers determine how to manage the current infestation and make recommendations to eliminate the water problem.
 
SERVPRO is a restoration company, able to remediate serious problems like mold. We follow EPA industry standards  when containing, removing, and sanitizing areas suffering from mold outbreaks. Keeping the moldy material in place until safely removing it prevents spread to other spaces within your home. Physical barriers like heavy duty plastic sheeting and high-technology equipment like negative air pressure scrubbers assist us in this endeavor.
 
We restore the appearance of your exterior and interior after abating a broad range of damaging processes and work with other contractors hired to make specific repairs. Ice dams frequently trace their cause to poorly maintained or clogged gutters and drains. SERVPRO remediates the mold and pinpoints the reasons it plagues you. We help you arrange for repairs that stop moisture from feeding mold spores in your attic.
 
Rely on SERVPRO of Richland County  to investigate your potential mold issues.

Remediating Mold Damage in Your Richland County home.

11/30/2017 (Permalink)

SERVPRO uses different cleaning methods for each unique surface to remediate mold

Mold is often undetectable in Ohio homes until it has become a significant problem. Not every type of mold has that distinctive, ‘musty’ odor and if the growth started behind a wall or in the attic, the smell is not noticeable until the mold has grown into a large colony of spores.

Restoring a Mansfield home of the effects from mold damage home is a task that needs a professional service. SERVPRO keeps a trained crew on 24-hour notice to support our neighbors and customers. We have some of the best-trained personnel in the industry to clean mold from the property and safely remove it from each home.

These technicians first determine the type of surface infested. This inspection decides both the cleaning methods needed and how much time may be required to complete the job. We usually divide surfaces into porous, nonporous, and semi-porous categories.

Porous surfaces are typically building materials and fabrics; drywall and upholstery for example. They are often cleanable, but if the mold is very thick or has grown into the material, we dispose of it. Our cleaning methods for these surfaces involve vacuuming them with special HEPS filters that catch tiny amounts of loose mold, even a single spore.

After finishing vacuuming, we move on to using spray bottles with an antimicrobial cleaner and foaming agents to dampen the surface. Wetting loosens the mold and allows technicians to remove it with cloths and sponges.

Nonporous surfaces are the easiest to clean. This category includes metal and glass tabletops as well as marble and smooth stone kitchen countertops. In many cases, we can remove the mold with dry cloths and sponges. Technicians wipe down the surfaces from top to bottom to prevent accidentally leaving spores at the top or along the sides. If the mold layer is thick, we vacuum it first before dry wiping.

Semi-porous surfaces (concrete and wood decks for example) require methods not acceptable on other surfaces. Affected surfaces may need sanding to wire brushing and other abrasive tools to dig out the mold. The cleaners we use on these surfaces would mar or otherwise destroy glass and metal surfaces. If mold has penetrated the surface of the wood or concrete, technicians may have to sand them down by hand or with a power sander to remove it.

Returning your home to its pre-mold condition is not a quick or easy set of processes. SERVPRO of Richland County  has years of experience in helping our customers through each step to put you back into your home. If you need us, call (419) 526-2701 today to set up an inspection.

Follow These Mold Safety Tips If You Suspect Mold in your Richland County Home.

11/30/2017 (Permalink)

Mold Remediation  Follow These Mold Safety Tips If You Suspect Mold in your Richland County Home. Be careful! Without proper training, you could be spreading mold throughout your home

If you see visible mold, do not disturb it. You can inadvertently spread the mold infestation throughout your home. When mold is disturbed, the mold can release microscopic mold spores which become airborne and can circulate inside your home.

What to Do:

  • Stay out of affected areas.
  • Turn off the HVAC system and fans.
  • Contact SERVPRO of Richland County for mold remediation services.

What Not to Do:

  • Don’t touch or disturb the mold.
  • Don’t blow air across any surfaces with visible or suspected mold growth.
  • Don’t attempt to dry the area yourself.
  • Don’t spray bleach or other disinfectants on the mold.

About Our Mold Remediation Services

SERVPRO of Richland County specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business.  Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.

MOLD: what to do until help arrives

9/5/2017 (Permalink)

Mold Remediation MOLD: what to do until help arrives Visible Mold on support beams due to water damage

In as little as 48 hours mold can quickly become a problem in your home or business. Mold can cause health effects and can cause significant damage to your property. SERVPRO franchise Professionals have the training, protective gear, and specialized equipment necessary to handle your mold problem. By calling in the professionals at SERVPRO your heading in the right direction. 

WHAT TO DO: 

1. Stay out of affected areas

2. Turn off the HVAC system and fans.

3. Contact a SERVPRO Franchise for mold remediation services.

WHAT NOT TO DO:

1. Don't touch or disturb the Mold

2. Don't blow air across any surfaces with visible mold.

3. Don't attempt to dry the area yourself.

4. Don't spray bleach or other disinfectants on the mold.